top of page

CHALKBOARD
SURFACES

CHALKBOARD SURFACES

The ultra-smooth and ultra-hard finish enables dry markers and chalk to glide easily across the CeramicSteel surface with minimal friction. The surface smoothness allows more dry-erase ink and chalk to be removed, improving erasability and eliminating “ghost writing”.

MARKERBOARD SURFACES
WRITING SURFACE SPEC.

CHALKBOARD SURFACES

SPECIFICATION

e3 CeramicSteel chalkboard surfaces combine an excellent erasability with wear resistance, durability and product lifetime warranty. Our smooth matte finish chalk surfaces will not leave “ghosting” and yield less chalk dust for a cleaner, healthier environment. Proper use and maintenance will keep your board looking like new.

Magnet Capability

​

The CeramicSteel surfaces are ideal for all magnets and magnetic impregnated materials and will not be scratched or damaged from the contact.

​

Flame Resistant

​

The Porcelain-On-Steel surface is 100% non-combustible.

Cleaning 

​

First use of e3 CeramicSteel chalkboards

  1. If present, remove the protective film.

  2. Chalk the entire surface using the long side of the chalk.

  3. Erase the board with a latex or felt eraser. Keep the erasers dry and clean them regularly.

  4. Clean the surface with clear, warm water. (Use 5% Extran MA 02 or phosphate-containing cleaner in water and rub well with a kitchen sponge when necessary.)

  5. Rinse well with clear water and strip/wipe the surface with a good window stripper/squeegee. Allow the surface to dry completely before use.

General cleaning instructions for e3 chalkboard

  1. Erase the board with a latex or felt eraser. Keep the erasers dry and clean them regularly.

  2. Clean the surface with clear, warm water. (Use 5% Extran MA 02 or phosphate-containing cleaner in water and rub well with a kitchen sponge when necessary.)

  3. Rinse well with clear water and strip/wipe the surface with a good window stripper/squeegee. Allow the surface to dry completely before use. Boards used moderately should be cleaned two to three times a week. Boards used more intensely may require daily cleaning.

Color may vary from monitor to monitor. Actual samples available upon request.

​

Colors may vary slightly between dye lots.

FRAME & TRAY FINISHES
SINCE 1938

9

7

Quality Without Compromise

YEARS

bottom of page